specification control drawing tyco electronics corporation 305 constitution drive menlo park, ca 94025, usa raychem products title : stub splice sealing system multi-wire unless otherwise specified dimens ions are in millimeters. inches dimensions are between brackets. document no .: d-436-60/-61 tolerances: 0.00 n/a 0.0 n/a 0 n/a angles: n/a roughness in micron tyco electronics reserves the right to amend this drawing at any time. users should evaluate the suitability of the product for their application. date: 05-dec.-00 doc issue: 1 drawn by: m. foronda replaces: n/a dcr number: d001301 prod. rev. see table scale: none size: a sheet: 1 of 1 if this document is printed it becomes unc ontrolled. check for the latest revision. materials 1. insulation sleeve: heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene flouride. 2. meltable sealing rings: modified thermoplastic. 3. seamless stub splicer: base metal: copper alloy 101 or 102 per astm b-75. plating: tin per mil-t-10727, type 1. color code: see table below. dimensions of stub splicer: part prod. cma weight color name rev. range i.d. o.d. max. code d-436-60 a 779 - 2680 1.75 (0.069) 1.63 (0.064) 2.68 (0.106) 2.64 (0.101) 1.65 lbs/mpc blue d-436-61 a 1900 - 6755 2.60 (0.102) 2.46 (0.097) 3.89 (0.153) 3.73 (0.147) 2.15 lbs/mpc yellow application 1. these parts are designed to provide an i mmersion resistant stub splice in wires ha ving insulations rated for at least 135 c. wire accommodation: jacket o.d. ? 2.03 (0.080) max wire gauge cma number d-436-60 d-436-61 16 2426 --- 2 18 1900 --- 2 - 3 20 1216 2 2 - 5 22 754 2 - 3 3 - 8 24 475 2 - 5 4 - 10 26 304 3 - 8 9 - 10 2. parts will meet performance requirements of mil-s-81824/1. 3. recovered dimensions of insulation sleev e: i.d ? 3.18 (0.125) max wall ? 0.33 (0.013) min
|
